CARE & MAINTENANCE

It is hard, nonporous surface makes Quartz slabs easy to clean. In most cases, soap and water or a mild detergent are all that is required to maintain its luster. If necessary, apply common, non-abrasive, household cleaners such as Soft Scrub Mold & Mildew Stain Remover Gel or Comet Soft Cleanser Cream With Bleach directly on a damp cloth or sponge and wipe the surface, rinsing thoroughly after cleaning.For more details on the use and maintenance of Andy materials, please refer to our common problem part.

Daily cleaning

①    Wipe the surface with a soft cloth or non abrasive cleaner dipped in warm water with a mild detergent. Rinse with water and dry with a soft cloth or paper towel.

②    Always wipe wet spills to prevent the formation of copper rust.

③    First check each cleaning product in an inconspicuous area to ensure that it does not damage the surface. The accumulation of aeruginosa may look like a light stain.

④    Please note that natural, honed, concrete and rough finishes require more cleaning than our polished finishes. As these finishes have more exposed surface areas, metal marks, fingerprints

       and other signs of daily life will be displayed.

      Most of these traces can be easily removed and non abrasive cleaning products are used.

Stubborn stain

①    Gently} wipe the area with a soft cloth or paper towel and an approved cleaner.

②    Clean larger areas in circular motion rather than the stain itself.

③    Rinse with water and dry with a soft cloth or paper towel.

④    If the stain is still visible, repeat the process.

Dry stain

①    Dry spills and stains should be restored with water for a few minutes before attempting the recommended cleaning method.

②    Clean the surface with a damp cloth or paper towel.

Rust and metal marks

①    Add a small amount of bar keepers friend ®  Place cleaner or oxalic acid on a damp cloth. Do not use the grinder.

②    Wipe gently in circles.

③    Rinse thoroughly with warm water and dry with a soft cloth or paper towel.

④    Please follow these instructions carefully to avoid damaging the surface.